IMPORTANT: THESE WILL ONLY WORK WITH THE BOSS KATANA MKII, the first Boss Katana MkI will NOT WORK for these patches.

These are custom-made patches for the Boss Katana MKII Modelling Amplifier. These specific patches mimic my favorite tones from Marshall, Fender, and Mesa tube amplifiers as well as pedals from JHS and and Dunlop.

Here are the patches included: 01: Marsha_Clean 02: Marsha_BoostCln 03: Marsha_Dpedal 04: Frender_Clean 05 Frender_LilDrive 06 PUZZPACEwithAMP 07 AmpaBoogerDist

This pack contains a unique set of patches with a range of sounds and tones which have been meticulously hand crafted by the guitarist and audio engineer Nick Rivers. These feature some of the tones Nick uses LIVE and in the studio.

UPDATING YOUR BOSS KATANA DRIVER/SYSTEM PROGRAM To ensure your Nick Rivers BOSS Katana patches are loadable onto your BOSS Katana amp, you will need to have installed the latest drivers for the Boss Tone Studio Editor software & system updates for your Boss Katana amp.

You may be prompted to install these when you connect your Katana to the BOSS Tone Studio Editor software. Click this link to find your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant Katana driver and/or system program for your Mac or Window PC. Download the file and follow the instructions on the page closely to update the firmware. Once complete, you will now be able to import your patches into the Boss Tone Studio Editor software.

IMPORTING NICK RIVERS PATCHES INTO YOUR BOSS KATANA MKII AMP

Congratulations on your new Nick Rivers Katana amp patches! To add them to your BOSS Katana amp, you will need to download and install the BOSS Tone Studio Editor software.

To do this - follow this link and choose your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant BOSS Tone Studio software, either for Mac or Windows PC. Download the file and follow the instructions to install.

Once complete, open the BOSS Tone Studio Editor. Click on the 'Librarian' tab on the left side of the screen, then click 'Import' on the top bar. Locate and select your Nick Rivers patches. They will now be added to the Tone Studio Editor library.

Connect your BOSS Katana amp via USB to the BOSS Tone Studio Editor. Drag the Nick Rivers patches you want to use into the amp channel slots on the left side of the screen. Select the corresponding channel on your BOSS Katana amp, and BOOM! You've now got some ROCKIN' tube amp sounding tones!

IMPORTANT: THESE WILL ONLY WORK WITH THE BOSS KATANA MkII, the first Boss Katana MkI will NOT WORK for these patches.

These are custom-made patches for the Boss Katana MKII Modelling Amplifier. These specific patches sound best with single coil guitars (Stratocaster). They were created using a Fender MIM Jimi Hendrix Stratocaster.

Here are the tones included: 01: STR_MarshaClean 02: STR_MarshaClean2 03: STR_Dreamstate 04: STR_SemiDirty 05: STRVintage_Clean 06: STRVintage_Drive 07: STR_JIMFUZZ 08: STR_SuperDISTORT

DESCRIPTIONS 01: STR_MarshaClean Based on a Marshall Tube Amp Clean Tone 02: STR_MarshaClean2 Based on a Marshall Tube Amp Clean Tone Hi-Gain 03: STR_Dreamstate Based on the song 24 by Nick Anderson and The Skinny Lovers 04: STR_SemiDirty Based on a Marshall Amp driven by a JHS Charlie Brown V2 Pedal 05: STRVintage_Clean Based on Fender Rockerverb Clean Tone 06: STRVintage_Drive Based on guitar through Vintage Peavey Bass Amp 1x12 07: STR_JIMFUZZ Based on a glitching 60s Fuzz turned all the way up 08: STR_SuperDISTORT Based on a MesaBoogie Triple Rectifier

This pack contains a unique set of patches with a range of sounds and tones which have been meticulously hand crafted by the guitarist and audio engineer Nick Rivers. These feature some of the tones Nick uses LIVE and in the studio.

UPDATING YOUR BOSS KATANA DRIVER/SYSTEM PROGRAM To ensure your Nick Rivers BOSS Katana patches are loadable onto your BOSS Katana amp, you will need to have installed the latest drivers for the Boss Tone Studio Editor software & system updates for your Boss Katana amp.

You may be prompted to install these when you connect your Katana to the BOSS Tone Studio Editor software. Click this link to find your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant Katana driver and/or system program for your Mac or Window PC. Download the file and follow the instructions on the page closely to update the firmware. Once complete, you will now be able to import your patches into the Boss Tone Studio Editor software.

IMPORTING NICK RIVERS PATCHES INTO YOUR BOSS KATANA MKII AMP

Congratulations on your new Nick Rivers Katana amp patches! To add them to your BOSS Katana amp, you will need to download and install the BOSS Tone Studio Editor software.

To do this - follow this link and choose your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant BOSS Tone Studio software, either for Mac or Windows PC. Download the file and follow the instructions to install.

Once complete, open the BOSS Tone Studio Editor. Click on the 'Librarian' tab on the left side of the screen, then click 'Import' on the top bar. Locate and select your Nick Rivers patches. They will now be added to the Tone Studio Editor library.

Connect your BOSS Katana amp via USB to the BOSS Tone Studio Editor. Drag the Nick Rivers patches you want to use into the amp channel slots on the left side of the screen. Select the corresponding channel on your BOSS Katana amp, and BOOM! You've now got some ROCKIN' tube amp sounding tones!

IMPORTANT: THESE WILL ONLY WORK WITH THE BOSS KATANA MKII, the first Boss Katana MkI will NOT WORK for these patches.

These are custom-made patches for the Boss Katana MKII Modelling Amplifier. These specific patches sound best with humbucking pickups. They were created using a 2009 Gibson SG Standard.

Here are the tones included: 01: SG_MarshaClean 02: SG_MarshaClean2 03: SG_Dreamstate 04: SG_SEMI_DIRTY 05: SG_Vintage_Clean 06: SG_Vintage_Drive 07: SG_SuperFUZZ 08: SG_SuperDISTORT

This pack contains a unique set of patches with a range of sounds and tones which have been meticulously hand crafted by the guitarist and audio engineer Nick Rivers. These feature some of the tones Nick uses LIVE and in the studio.

UPDATING YOUR BOSS KATANA DRIVER/SYSTEM PROGRAM To ensure your Nick Rivers BOSS Katana patches are loadable onto your BOSS Katana amp, you will need to have installed the latest drivers for the Boss Tone Studio Editor software & system updates for your Boss Katana amp.

You may be prompted to install these when you connect your Katana to the BOSS Tone Studio Editor software. Click this link to find your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant Katana driver and/or system program for your Mac or Window PC. Download the file and follow the instructions on the page closely to update the firmware. Once complete, you will now be able to import your patches into the Boss Tone Studio Editor software.

IMPORTING NICK RIVERS PATCHES INTO YOUR BOSS KATANA MKII AMP

Congratulations on your new Nick Rivers Katana amp patches! To add them to your BOSS Katana amp, you will need to download and install the BOSS Tone Studio Editor software.

To do this - follow this link and choose your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant BOSS Tone Studio software, either for Mac or Windows PC. Download the file and follow the instructions to install.

Once complete, open the BOSS Tone Studio Editor. Click on the 'Librarian' tab on the left side of the screen, then click 'Import' on the top bar. Locate and select your Nick Rivers patches. They will now be added to the Tone Studio Editor library.

Connect your BOSS Katana amp via USB to the BOSS Tone Studio Editor. Drag the Nick Rivers patches you want to use into the amp channel slots on the left side of the screen. Select the corresponding channel on your BOSS Katana amp, and BOOM! You've now got some ROCKIN' tube amp sounding tones!

IMPORTANT: THESE WILL ONLY WORK WITH THE BOSS KATANA MkII, the first Boss Katana MkI will NOT WORK for these patches.

These are custom-made patches for the Boss Katana MKII Modelling Amplifier. These specific patches sound best with P90 pickups. They were created using a Reverend Tricky Gomez 290

Here are the tones included: 01: P90_MarshaClean 02: P90_MarshaClean2 03: P90_Dreamstate 04: P90_SEMI_DIRTY 05: P90_Vintage_Clean 06: P90Vintage_Drive 07: P90_SuperFUZZ 08: P90_SuperDISTORT

This pack contains a unique set of patches with a range of sounds and tones which have been meticulously hand crafted by the guitarist and audio engineer Nick Rivers. These feature some of the tones Nick uses LIVE and in the studio.

UPDATING YOUR BOSS KATANA DRIVER/SYSTEM PROGRAM To ensure your Nick Rivers BOSS Katana patches are loadable onto your BOSS Katana amp, you will need to have installed the latest drivers for the Boss Tone Studio Editor software & system updates for your Boss Katana amp.

You may be prompted to install these when you connect your Katana to the BOSS Tone Studio Editor software. Click this link to find your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant Katana driver and/or system program for your Mac or Window PC. Download the file and follow the instructions on the page closely to update the firmware. Once complete, you will now be able to import your patches into the Boss Tone Studio Editor software.

IMPORTING NICK RIVERS PATCHES INTO YOUR BOSS KATANA MKII AMP

Congratulations on your new Nick Rivers Katana amp patches! To add them to your BOSS Katana amp, you will need to download and install the BOSS Tone Studio Editor software.

To do this - follow this link and choose your BOSS Katana model: https://www.boss.info/uk/support/updates_drivers/h_m/

Select the relevant BOSS Tone Studio software, either for Mac or Windows PC. Download the file and follow the instructions to install.

Once complete, open the BOSS Tone Studio Editor. Click on the 'Librarian' tab on the left side of the screen, then click 'Import' on the top bar. Locate and select your Nick Rivers patches. They will now be added to the Tone Studio Editor library.

Connect your BOSS Katana amp via USB to the BOSS Tone Studio Editor. Drag the Nick Rivers patches you want to use into the amp channel slots on the left side of the screen. Select the corresponding channel on your BOSS Katana amp, and BOOM! You've now got some ROCKIN' tube amp sounding tones!

*Note: these patches are for the Boss Katana MkII only, they will not work for the MkI

This collection includes the entire NICK RIVERS BOSS KATANA MKII COLLECTION.

That's the humbucker, single coil, p90, and amp model collections in ONE package for a discounted rate.